|
|
|
Converters > Other Interfaces > T1/T3/E1/E3 > T1, E1, and T3 Rate Converters |
T1 Rate Converters, RS-530, DC
|
| Manufacturer: |
Black Box |
| Item #: |
MT1102A-DC |
| Availability: |
0
$784.03
|
|
Description:
- AC- and DC-powered models available, plus Rackmount Cards.
- T3 Rate Converter includes a built-in Ethernet bridge.
- T1 and E1 Rate Converters feature two techniques of line coding each and three methods of clocking. Now you can convert between T1 and V.35 or RS-530, E1 between V.35, and T3 between Ethernet and Fast Ethernet with our new Rate Converters! Two ways to T1 speed. Our T1 Rate Converters support unframed operation, enabling you to take advantage of T1's 1.544-Mbps speed in a single channel. Data transmission is synchronous and full duplex. Two techniques of line coding can be used for T1 transmission, either B8ZS or AMI. Line impedance is rated at 100 ohms across the T1 channel. Three timing methods can be used. Clocking can be received from the T1 line, managed externally from the network device connected on the other end of the V.35 or RS-530 link, or performed internally from the converter's oscillator. For diagnostics, local analog loopbacks can be activated from the T1 or DTE interfaces. Three front-panel LEDs show when data is transmitted to the link, when data is received from the link, and when no data is received from the link. A fourth LED indicates active loopback. A fifth LED shows when the unit is powered up. Three models each are available for T1 to V.35 conversion and T1 to RS-530 conversion. Choose from AC- or DC-powered standalone units or Rackmount Cards. The Rackmount Cards fit in our RackNest 2/14. Bring V.35 and E1 together. The new E1 Rate Converter is very similar to our T1 Rate Converters, but with two notable differences. First, it uses HDB3 or AMI line coding for E1 transmission. Second, line impedance is rated at 120 ohms (balanced) and 75 ohms (unbalanced) across the E1 channel. Conversion is between V.35 and 2.048-Mbps E1 only. Choose from two models, depending on your application's power. Take what's fast and make it faster. If you want to take interface conversion to extreme speeds, this Rate Converter can connect your 10-Mbps Ethernet or 100-Mbps Fast Ethernet equipment to a single-channel 44.746-Mbps T3 service! A built-in Ethernet bridge with VLAN support enables virtual LAN connections. The Rate Converter performs frame filtering and forwarding at the rate of 150,000 frames per second, and the bridge causes no LAN delays. The T3 Rate Converter provides full control over multicast and broadcast messages. Autonegotiation enables a plug-and-play Ethernet connection without any additional configuration. Front- and back-panel LEDs indicate Alarm Indication Signal (AIS) and Loss of Signal (LOS) line conditions and provide information and status of the Ethernet/Fast Ethernet link. Clocking either can be received from the T3 line or done internally by the converter's oscillator.
|
Electrospec, Inc. is committed to serving its customers in a manner, which ensures that customer requirements are always met or exceeded.
Our objective is to provide electronic parts and components to our customers on the agreed upon date and at the agreed upon price.
Customer concerns and/or complaints will be addressed quickly and effectively to assure the customer's satisfaction.
Our service, delivery performance and our quality system will be continually updated to reflect system changes and improve our effectiveness.
|
MT1101A |
E1 Rate Converter, V.35, AC
|
0 |
$663.49
|
MT1101A-DC |
E1 Rate Converter, V.35, DC
|
0 |
$784.03
|
MT1102A |
T1 Rate Converters, RS-530, AC
|
0 |
$663.49
|
MT1102C |
T1 Rate Converters, RS-530, Rackmount Card
|
0 |
$542.95
|
MT1100A |
T1 Rate Converters, V.35, AC
|
4 |
$663.49
|
MT1100C |
T1 Rate Converters, V.35, Rackmount Card
|
0 |
$542.95
|
MT1103A |
T3 Rate Converter, 10BASE-T/100BASE-T, AC
|
2 |
$2,169.66
|
MT1103A-DC |
T3 Rate Converter, 10BASE-T/100BASE-T, DC
|
12 |
$2,290.20
|
|
|
|
|
|
